|
|
 Build Your Own Protein Feeder
- Cut all but a 2" lip out of the bottom of a 55 gallon drum.
- Elevate drum high enough to allow the funnel and down spout to clear the ground.
- Insert funnel/spout through top of drum.
- Pull spout down firmly. Use a 2x4 and a deadblow hammer to seat the funnel portion evenly with the 2" lip on the bottom of the drum.
- Lay drum down on it's side and (from the inside) drill 2 pilot holes in the lip of the funnel. Insert two 1/2" sheet metal screws to secure. (Spin drum and repeat) You should have 4 screws when finished.
- Turn drum upside down and caulk with clear silicone where the drum and funnel meet.
- Allow to dry overnight.
- Install 4-way with (2)bolts included.
- Install BossBuck Barrel Band leg systems for a more moisture resistant feeder.
- Our suggested feed height is 38" - 40" from the ground.
|
|
