1200# Protein Feeder
- Height adjustable from 108" to 132"
- Hopper 61" tall x 43½" wide
- Hopper weight 60lbs
- Legs 105" 1½" - 14 gauge galvanized steel
- All galvanized hardware and stainless steel inserts
- Battery Included
- Solar Panel sold separately
|
The 1200lb. capacity hopper is 3/8" thick wall of HDPE UV Protected plastic that will not rot, rust or leak!
Our 1200lb. capacity feeder is the only adjustable height Bulk Feeder on the market today. By moving the cap brackets on
the leg channels you can switch this versatile feeder from a 40" Protein feed height, to a eye level control box height
for feeding corn through the optional Automatic Conversion System.
With our Patented Protein/Gravity Head you get the
most moisture resistant free choice feeding system available on the market today ! The Custom Designed head features a 10
degree of angle, and a 1" overhang on the 4" feed ports. Each feed port has a drain hole to disperse any water
that enters the tip of the feed port. Our patented design features an internal cone that dispenses the feed evenly
to the FOUR feed ports. The adjustable height inner sleeve allows the user to control the feed flow of almost all feed shapes
and sizes. Push it all the way up to virtually shut off the flow, or ease it down until you get the optimal flow on your
favorite type of critter food. Our double walled, domed, hinged LID tops this unit off in style, and function.
Built oversize this lid allows the hopper system to breath, thus eliminating condensation. The wagon wheel bracing in the
top of all Boss Buck Feeders allow this unique design to maintain it's shape while achieving ambient temperature faster
than Steel or Fiberglass feeders.
Boss Buck recommends using the Feeder Filling Station® to fill your Non-Typical Bulk Feeder. Portable,
safe, fast and affordable, the Feeder Filling Station® is a must for making short work of filling up feeders!
We timed it at 17 minutes to fill the entire Non-Typical Bulk Feeder with corn. That's 24 bags! Now that's fast!
It only cost $379.00 too! That's the best part.
UPGRADE:
T-Post Foot Pads (Exclusive)!
The Non-Typical foot design is completely unique! The feet are designed to except
a T-Post through the center of the foot. The feet are large 7" square steel plates.
Each foot has a large nut welded to it and a ½" bolt that when tightened secures the feeder to
the T-Post. This will not only protect the feeder but keep it level and immobile.
Converts from spin feeder to protein in minutes!!
|
|
Complete Feeder Includes:
|
NEW!Shark Teeth™
Patent Pending
Sold seperately
Guard your feeder from
coons & other wildlife! Repels raccoons, squirrels, livestock & hogs. No more rubbing, bumping, climbing,
licking, pushing or chewing on your feeder! (Attaches to legs, control box, protein head, etc.)
More Info
|
|
|
|
|
4-Way Head
Item#: 1.8
|
Hinged Lid
Item#: 1.12
|
Standard Feeder Feet
Item#: 1.24
|
|
|
Accessories (Sold Separately):
|
|
|
|
|
Feeder Filling System
Item#: 24.1
|
Automatic 12v Deluxe Kit
Item#: 1.6BB
|
Cutoff Valve
Item#: 1.11
|
|
|
Upgrades:
|
|
|
|
|
Heavy Duty Feeder Feet
Item#: 24.3
|
|
|
|
|
|
Please Note:
All feeders must be shipped freight which will incur a minimum freight charge of $80.00.
To cut down costs, it is advised that you have the feeder(s) shipped to a business as opposed
to a residence. A $27.50 service charge is applied to all residential (non-business to business) deliveries.If you would like,
you could email
us with your shipping address and we could get an accurate freight quote for
you.
Generally a second feeder ships for little or no extra cost.
|